These stains are richly pigmented, penetrating, 100% acrylic resin-based stains that are unique to Cabot . They provide greater hiding power and color than semi-transparent stains, yet their attractive flat finish highlights the natural beauty of the wood's texture. These stains are environmentally friendly, and equipment is easily cleaned with soap and water. Cabot Semi-Solid acrylic stains provide long-lasting, vapor-permeable protection that beautifies and enriches exterior wood surfaces. Containing a special acrylic resin, these products are ideal for all types of natural wood siding and shingles. Exceptional ultra-violet protection is achieved through the use of nonfade, earth-tone pigments, in addition to the superior acrylic resin. Semi-Solid acrylic stains are formulated to weather slowly over time, without cracking, peeling, or blistering. Cabot Semi-Solid acrylic stains are for application on new or properly reconditioned wood, including siding, shingles, shakes, fences, roofs, and log homes. These beautiful stains provides outstanding results on all natural wood species such as cedar, redwood, fir, pine, spruce and cypress, including pressure-treated wood and plywood panel siding. These stains may also be applied to new, unprimed fiber cement siding. Apply evenly with a brush, roller, or spray. Best results can be obtained by using a high-quality polyester bristle brush. When rolling and spraying immediately backbrush after each section is coated to ensure proper penetration. Covers approximately 400 Sq. Ft. to 600 Sq. Ft. per gallon on smooth surface or 150 Sq. Ft. to 250 Sq. Ft. per gallon on rough, new wood. Easy soap and water cleanup.